Influence of operating conditions in the hydrogen production by steam reforming of methanol: numerical approach
Abstract
This work describes the unidimensional study of steam reforming of methanol at short pseudo-contact time. Steam reforming process (SRP) is important to hydrogen production as energetic vector. A compressible mathematical model 1-D is developed. Peppley kinetic mechanism (1999) is adopted. The numerical predictions show up the same trend as the experimental ones. A sensitivity analysis of the significant variables of the process is carried out (pressure, CH3OH/H2O ratio and temperature).
References
[2] Mathiak J, Heinzel A, Roes J, Kalk T, Kraus H, Brandt H. Coupling of a 2.5 kW steam reformer with a 1 kWel PEM fuel cell. J Power Sources. 131:112-119. 2004.
[3] Hong-Yue Tang, Jason Greenwood, Paul Erickson. Modeling of a fixed-bed copper-based catalyst for reforming methanol: Steam and autothermal reformation. 40, 8034-8050. 2015.
[4] L. Pacheco, D. Della-Valle, O. Le Corre, H. Habchi, T. Lemenand, H. Peerhossaini, “Modeling open flow steam reforming of metanol over Cu/ZnO/Al2O3 vatalyst in an axisymmetric reactor”. Journ. Appl. Fluid Mechanics.Vol 8, No 1, pp 33-42. 2015.
[5] Peppley B.A., J.C. Amphlett, L.M. Kearns, R.F. Mann, “Methanol-steam reforming on Cu/ZnO/AL2O3. Part 1: the reaction network”. Appl. Catal. A: Gen. 179,21-29. 1999a.
[6] Peppley B.A., J.C. Amphlett, L.M. Kearns, R.F. Mann, “Methanol-steam reforming on Cu/ZnO/AL2O3 catalysts. Part 2: A comprehensive kinetic model”. Appl. Catal. A: Gen 179, 31-49. 1999b.
[7] Zhao T., K-D. Krever, T. Van-Nguyen, “Advances in Fuel Cells”. Elsevier Ltd. 2007.
[8] Takeguchi T., Y. Kni, M. Inoue, K. Eguchi, “Steam reforming of methanol on copper catalysts supported on large-surface-area ZnAl2O3”, Catal. Lett. 83 Nos 1-2. 2002.
[9] Agrell J., H. Birgersson, M. Boutonnet, “Steam reforming of methanol over a Cu/ZnO/Al2O3 catalyst: a kinetic and strategies for suppression of CO formation”. J. of Power Sources 106, 249-257. 2002.
[10] Jiang C.J., D.L. Trimm, M.S. Wainwright, “Kinetic study of steam reforming of methanol over copper-based catalysts”. Appl. Catal. A: Gen. 93,245-255. 1993.
[11] Ranganathan E.S., S.K. Bej, L.T. Thompson,” A methanol steam reforming over Pd/ZnO and Pd/CeO2 catalysts”. Appl. Catal. 289,153-162. 2005.
[12] Purnama H., T. Ressler, R.E. Jentoft, H. Soerijanto, R. Schlögl, R. Schomäcker, “CO formation/selectivity for steam reforming of methanol with a commercial CuO/ZnO/Al2O3 catalyst”. Appl. Catal. A: Gen. 259,83-94. 2004.
[13] A. Iulianelli, P. Ribeirinha, A. Mendes, A. Basile. Methanol steam reforming for hydrogen generation via conventional and membrane reactors: A review. Renewable and sustainable Energy Reviews. 29, 355-368. 2014.
[14] Jiang C.J., D.L. Trimm, M.S. Wainwright, Kinetic mechanism for the reaction between methanol and water over a Cu/ZnO/Al2O3, Appl. Catal. A: Gen. 97,145-158. 1993b.
[15] S.T. Yong, C.W. Ooi, S.P. Chai, X.s. Wu. Review of methanol reforming-Cu-based catalysts, surface reaction mechanisms, and reaction schemes. International Journal of hydrogen energy. 30, 9541-9552. 2013.










